August 2026: MEDI introduced a new CNC Tongtai QT2 pallet changer with a 24,000-rpm electrospindle. This not only increases the number of machines and thus the company’s production capacity, but also enables faster processing of non-ferrous materials and minimizes raw material loading times thanks to the double pallet, which is particularly useful for rapid machining…
November 2025: A third Quaser MV184 has replaced an older center, adding new reliability and quality to the fleet.
May 2025: A new 3 axis machine has replaced an old one, and it allows us to work parts till 1500mm of lenght.
October 2024: MEDI manufactures single parts by milling, waterjet or light carpentry, and provide also turned or laser cut parts to offer assembled products ready to be used by the customer. In the picture below one assembled product that works under vacuum.
March 2023 – Another Hermle machine belongs to MEDI: C250! This new CNC helps us to mill with usual accuracy and efficiency small and medium size parts. This CNC, like others, is equipped by zero point and pallet, in order to cut set up time.
September 2022 – A new vertical automated storage will improve our organization to handle final parts on stock.
July 2022 – A new grinding machine has arrived to boost our operation of finishing. In addition to common type of finishing, Costa helps us to: Cut automatically all flosses around the perimeter by a line of brushes, saving a lot of manual time. Operate like an horizontal grinding, going automatically back and forth and…
June 2022 – An additional second CNC Hermle has been linked to Erowa Leonardo robot. The two CNC are twin; in order to achieve maximum flexibility. They work without operator also for low-medium size batches. However, we decided to split them by materials: aluminum on one side, and steel/stainless steel on the other side. This…
Clock manufacturers are symbol of precision, because they are able to check the smallest measures. Working on precision in order to boost the quality means see beyond our eyes. Thinking about this we bought a new optical microscope 500X, to succeed in checking everything we like. Now, we are able to check quotes of 0,001mm,…
Manufacture complex mechanical parts with strictly tolerances could be very very hard to achieve. In particular, when the parts are “slim”, the reference planes not reliable, and we must check item “far” from them, it’s changeling keeping tolerances in a repetitive way. The most difficult tolerances to dealt with are: Parallelism and perpendicularity between planes…
